Hearth and Home Technologies Bravo, Aztec Log Assembly LOGS-AZTEC, Positioning the Logs

703-925

E. Positioning the Logs

If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the following instructions.

Log Assembly: LOGS-AZTEC

CAUTION: Logs are fragile! Carefully remove the logs from the packaging. Before placing logs, remove shipping bracket and tie straps from the burner and grate. Place the lava rock on the bottom of the firebox. Evenly spread out the lava rocks with your hand.

TAB TIE STRAPS

GRATE

BURNER

1 2 3 4 5 6 7 8

Shipping Bracket

Figure 12.2 Figure 12.3

1

1

Figure 12.4 Figure 12.5

LOG #1 (SRV703-701):Place log #1 between log tabs on the left side on the burner. The log should be pushed forward until the groove in the log makes contact with the front log tab. The right side of the log should contact the firebox.

2

3 4

Figure 12.6

2

3 4

Figure 12.7

LOG #2 (SRV703-702):Place log #2 flush with grate tines 3 and 4. On the front of log #2 there is a location feature to help locate the log. Slide the log to the right until the location feature contacts the fourth grate tine.

36 Hearth & Home Technologies • Bravo, Aztec • InD • 703-900 Rev. N • 8/06