Heatilator • SILHOUETTE Series Electric Fireplace • 4030-155 Rev K • 04/05
8
C. Framing

Figure 3.2 shows a typical framing (using 2 x 4 lumber) of

the heater, assuming combustible materials are used. All re-

quired clearances to combustibles around the heater must

be adhered to.

A*

B*

(header height)
14 in.
(356 mm) *If using the PBT or BKT Cabinet Trim Kits,
increase the width (A) by 1-1/4 in. (32 mm)
and header height (B) by 5/8 in. (16 mm).
Mantel height listed is measured
from the BASE of the heater.
3/4 in. - 12 in.
(19 mm - 305 mm)

C

(CEILING)
30 in. min.
(762 mm)
Figure 3.2 Framing the Heater
Model A B C
SILH50E
Series
in. 36-1/4 31-1/4 31-1/2
mm 921 794 800
SILH60E
Series
in. 41-1/4 34-7/8 35
mm 1048 886 889