E. Junction Box Installation

If the box is being wired from the OUTSIDE of the appliance:

Remove the cover plate located on the outer shell right side (see Figure 10.4).

Install the supplied Romexconnector in the cover plate.

Feed the necessary length of wire through the connector.

Make all necessary wire connections and reattach the cover plate to the outer shell.

If the box is being wired from the INSIDE of the appliance:

Remove the screw attaching the junction box/recep- tacle to the outer shell, rotate the junction box/recep- tacle inward to disengage it from the outer shell (see Figure 10.4).

Pull the electrical wires from outside the appliance through this opening into the valve compartment.

Feed the necessary length of wire through the connector.

Make all necessary wire connections to the junction box/receptacle and reassemble the junction box/ receptacle to the outer shell.

 

Romex

 

Connector

 

14/2WG

 

Cover Plate

 

outside firebox

WHT

 

BLK

 

WHT

 

BLK

Copper

 

GRN wire

ground attached

to GRN screw with

inside box

GRN wire

 

NOTE: Do NOT wire

Figure 10.4 Junction Box Detail

110VAC to wall switch.

F. Wall Switch Installation for Fan (Optional)

If the box is being wired to a wall mounted

 

 

 

 

switch for use with a fan (See Figure 10.5):

 

 

 

 

The power supply for the appliance must

 

 

 

SWITCH

 

be brought into a switch box.

MINIMUM 14-3 AWG

 

 

 

 

 

WITH GROUND

 

 

 

• The power can then be supplied from the

 

 

Red

 

 

switch box to the appliance using a mini-

 

 

Black

Black

 

mum of 14-3 with ground wire.

 

 

White

White

 

 

 

Green

Green

At the switch box connect the black (hot)

JUNCTION BOX

 

Green

 

Red

Black White

 

 

wire and red (switch leg) wire to the wall

 

 

switch as shown.

 

 

 

POWER

 

 

 

 

SUPPLY WIRES

At the appliance connect the black (hot),

 

 

 

SWITCH BOX

 

white (neutral) and green (ground) wires

 

 

 

 

 

to the junction box as shown.

 

 

 

 

Add a 1/4 inch insulated female connector

 

 

 

 

 

to the red (switch leg) wire, route it through

Red

 

 

 

 

the knockout in the face of the junction box,

 

 

 

 

 

and connect to the top fan switch connector

 

 

 

 

 

(1/4 inch male) as shown.

Figure 10.5 Fan Control Switch Wiring

 

 

 

Heat & Glo • SL-550 / 750 / 950TV-D2053-985 Rev. H • 9/06

23

Page 23
Image 23
Hearth and Home Technologies SL-750TV-D, SL-550TV-D Junction Box Installation, Wall Switch Installation for Fan Optional

SL-950TV-D, SL-750TV-D, SL-550TV-D, SL-550TV-IPI-D, SL-950TV-IPI-D specifications

Hearth and Home Technologies offers an impressive range of gas fireplaces with the SL-750TV-IPI-D, SL-950TV-IPI-D, SL-550TV-IPI-D, SL-550TV-D, and SL-750TV-D models. Each of these fireplaces showcases innovative design, outstanding performance, and advanced technology, making them a perfect choice for any modern home.

The SL-750TV-IPI-D is known for its large viewing area, providing a spectacular flame presentation that is both customizable and efficient. Its advanced IntelliFireĀ® ignition system ensures reliable and easy operation, minimizing the need for manual ignition. This model also offers a balanced flue design that allows for flexible installation options, enhancing its versatility.

Similarly, the SL-950TV-IPI-D boasts a larger firebox, providing even more impressive heat output and increased aesthetics. Its high-efficiency rating ensures that energy consumption is kept low while delivering warmth. This model also utilizes the IntelliFire system, but it is enhanced with LED accent lighting, creating an inviting atmosphere while complementing the fireplaceā€™s flickering flames.

On the smaller end of the spectrum, the SL-550TV-IPI-D combines compact design with remarkable efficiency. Its direct vent technology offers excellent venting options, allowing installation in various locations without compromising on performance. Equipped with adjustable flame settings, homeowners can tailor the experience to their liking, creating the perfect ambiance for any occasion.

The SL-550TV-D model takes a similar approach but focuses on traditional control mechanisms. This version allows users to manage the fireplace with ease through a manual control system while still maintaining the benefits of direct vent technology.

Lastly, the SL-750TV-D version offers a grand fireplace experience. It features a stunning glass front and can serve as a stunning focal point in larger living spaces. The model's durability is paired with elegant aesthetics, ensuring clients receive not just a heating solution but also a piece of art.

Collectively, all five models prioritize efficiency, design, and user-friendly features, ensuring that Hearth and Home Technologies delivers high-performing solutions that meet varied homeowner needs while offering the flexibility of installation and styles that fit seamlessly into any environment. Whether seeking warmth, style, or both, these fireplaces are worthy investments that enhance home living.