Installation

��Instructions

Models:

ST375

Termination Cap

These chimney termination caps have been tested for use with specific Hearth & Home Technologies Inc. (HHT) fireplaces and is a fireplace part. Refer to the fireplace installation isntructions for the correct accessories to be used. Check with your local building code agency before you begin installation to ensure compliance with local codes, including the need for permits and follow-up inspections. If you encounter any problems regarding code approvals, or if you need clarification of any of the instructions contained here, contact the Heatilator Technical Services Dept., Hearth & Home Technologies Inc., 1-800-927-6841 or 1-888-427-3973.

FEET

1a

1b

3

CHASE TOP

MAX. 4-3/4 in.

(121 mm)

2

Item

Description

Qty

1a

Termination Cap - Top

1

1b

Termination Cap - Base

1

2

Slip Section

1

3

Fastener Package

1

Note: The ST375 is designed for use with the SL300 Series pipe.

CAUTION

Sharp Edges

•Wear protective gloves and safety glasses during installation.

1.Assemble the SL300 Series chimney sections to within 4-3/4 in. (121 mm) below the top of the chase.

2.Remove the top.

3.Center the partially disassembled base of the termination cap over the chimney (inside the chase), and drop the double walled slip section through the flanged opening in the base of the termination cap so it telescopes both the inner and the outer chimney sections.

4.Adjust the termination cap so the slip section does not bind the chimney section. Rotate the cap so it is square with the chase and mark the position using the holes provided in the feet as a guide.

5.Drill through the chase top using a 1/8 in. (3 mm) diameter drill at the marked locations. Securely attach the cap to the chase using the screws provided in the fastener package.

6.Assemble the top of the termination cap using the four black screws provided in the fastener pack.

7.Caulk all screws (or nails) on the chase top. Periodic re-caulking may be needed to prevent leaks from developing.

Note: An arrow () found in the text signifies change in content.

WARNING

Fire Risk

•Intended for use with a metal chase top.

Use of combustible materials will cause a fire hazard.

WARNING

Fire Risk

You must use the slip section provided with this chimney top.

•Single wall or other variations from the slip section MUST NOT be used.

Substitute parts may increase temperatures to adjacent combustible materials.

Hearth & Home Technologies Inc. • ST375 Termination Cap • 33414 Rev F • 01/05

1

Page 1 Page 2
Page 1
Image 1
Hearth and Home Technologies installation instructions Installation Instructions, Models ST375 Termination Cap
Page 1 Page 2

ST375 specifications

Hearth and Home Technologies (HHT) ST375 is a standout model in the realm of gas fireplaces, renowned for its advanced features and innovative technologies that cater to both aesthetic beauty and functional efficiency. This particular model has been designed with modern consumers' needs in mind, making it an attractive addition to any home setting.

One of the most salient features of the ST375 is its striking design. The fireplace offers a large viewing area that allows for an immersive experience with the flickering flames. Its clean lines and contemporary styling make it suitable for a variety of interior décor themes, from minimalist to traditional. The ability to customize the look with various media options, such as traditional logs or modern crystals, enhances its versatility, allowing homeowners to create their desired ambiance.

Technologically, the ST375 incorporates HHT's advanced control systems. The IntelliFire® ignition system is a highlight, providing reliable and convenient starting with the push of a button. This system not only ensures a quick flame ignition but also enhances safety by eliminating the need for matches or lighters. Additionally, the ST375’s remote control capability allows users to adjust flame height and heat output from the comfort of their seating area, making it incredibly user-friendly.

Energy efficiency is another core characteristic of the ST375. With high thermal efficiency ratings, it is designed to convert more energy into heat while minimizing heat loss. This efficiency translates to cost savings on energy bills and a reduced environmental footprint, catering to those who prioritize sustainability in their home choices.

Moreover, the ST375 is built with HHT’s commitment to durability and reliability in mind. The use of high-quality materials ensures that this fireplace can withstand the test of time, offering peace of mind to homeowners. The unit comes with a robust warranty, reflecting the manufacturer's confidence in its construction and performance.

In conclusion, the Hearth and Home Technologies ST375 distinguishes itself through its elegant design, advanced technologies, and impressive energy efficiency. It is not just a heating source but a stylish centerpiece that enhances the overall atmosphere of any room. With the ST375, homeowners can enjoy the beauty of a real flame while benefiting from modern conveniences and sustainable practices. This fireplace truly embodies the essence of modern living, combining functionality and aesthetics seamlessly.
Top Page Image Contents