REFRACTORY - CB & CD SERIES INSTALLATION INSTRUCTIONS
6.Direct Vent
Place the back refractory into position and slide the side edge of the back refractory behind the side refractory. This will hold the back refractory in place. See Figure 6.
Figure 6 - Place Back Refractory-Direct Vent
Place the back refractory into position and slide the side edge of the back refractory behind the side refractory. Hold the back refractory in place until the second side refractory is installed. See Figure 7.
Figure 7 - Place Back Refractory-B-Vent
7.Repeat Step 4 to install the other side refractory piece.
8.Adjust the back and sides so no gaps are visible in the corners where the pieces come together.
9.Tighten screws.
10.Reinstall the rear log, grate/log assembly, glass panel assembly and screen.
11.Restore power and gas fl ow. Your refractory installation is now complete.
12/05 | 3 |