HDG Series Air Handler | INSTALLATION INSTRUCTIONS | Heat Controller, Inc. |
|
|
|
This document is customer property and is to remain with this unit.
These instructions do not cover all the different variations systems nor does it provide for every pos- sible contingency to be met in connection with installtion.
All phases of this installation must comply with NATIONAL STATE AND LOCAL CODES. If additional information is required please contact your local distributor.
2.0 Safety
This is a safety alert symbol. When you see this symbol on labels or in manuals, be alert to the potential for personal injury.
This is an attention alert symbol. When you see this symbol on labels or in manuals, be alert to the potential for personal injury.
Warning
Disconnect all power to unit before installing or servicing. More than one disconnect switch may be required to
Warning
If removal of the blower assembly is required, all disconnect switches supplying power to the equipment must be
Warning
Because of possible damage to equipment or personal injury, installation, service, and maintenance should be performed by a trained, qualified service personnel. Consumer service is recommended only for filter cleaning / replacement. Never operate the unit with the acess panels removed.
Warning
These instructions are intended as an aid to qualified, licensed service personnel for proper installation, adjustment and operation of this unit. Read these instructions thoroughly before attempting installation or operation. failure to follow these instructions may result in improper in- stallation, adjustment, service or maintenance possibly resulting in fire, electrical shock, property damage, personal injury or death.
3
