Installation & Operation

Radiant Infrared Heater

Heat Controller

 

 

 

WARNINGS

This electric appliance produces infrared heat and failure to follow

warnings and instructions can cause a fire or injury.

READ AND SAVE THESE INSTRUCTIONS!

WARNING

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly could result in serious injury or property damage.

Do not use gasoline or other flammable vapors or liquids, including aerosol cans, in the vicinity of this appliance while it is operating.

Do not store any of the following flammable materials on, or allow them to come in contact with the unit: rags, fabrics ,spray or aerosol cans, cleaning compounds, plastics or plastic containers, paper products, gasoline, kerosene, lighter fluid.

Do not install the heater close to furniture, curtains or other flammable items. Allow at least 36 inches (1 meter) between the heater and flammable items.

Do not cover or otherwise obstruct the heater.

WARNING

PERSONAL INJURY HAZARD

Do not touch the heater during operation. Burn or scald injury could result. The casing and front cover are extremely hot during operation.

Keep children away from the heater. Never leave an unsupervised child near the heater.

Because of injury risk, the heater should be operated only by individuals knowledgeable about the operation and familiar with the warnings and cautions listed in this manual.

Because of injury risk, this heater is not intended for use by persons with reduced physical, sensory or mental capabilities.

WARNING

PERSONAL INJURY HAZARD–SERVICE

To avoid property damage, personal injury or death due to electrical shock, do not service the unit without first unplugging the unit from the wall outlet and allowing adequate time for the unit to cool down.

Service must be performed only by a qualfied service technician.

Do not use the heater if the power cord is damaged. Contact an authorized servicer or qualified electrician to replace the cord prior to use.

Do not let the cord hang over the edge of a table or counter, or come into contact with hot surfaces.

WARNING

INSTALLATION & USE

To avoid property damage, personal injury or death due to electrical shock, follow all instructions in this Installation and Operation manual.

All local, regional and national electric codes and local construction codes must be observed in the installation of the heater.

The heater must be installed by a qualified electrician or service technician.

Be sure the voltage listed on the heater’s nameplate is the same as the voltage at the installation site.

Do not use the heater if the power cord is damaged. Contact an authorized servicer or electrician to replace the cord prior to use.

Remove the plug from the power outlet and wait until the heater is sufficiently cool before cleaning it.

CAUTION

Never use with an extension cord or multi-socket.

Never leave the heater unattended while it is operating.

Do not install the heater immediately below a wall socket outlet.

Do not use a timer or other device that automatically turns on the unit.

Do not use the heater with an external voltage regulator such as a dimmer or speed controller.

2

Page 2
Image 2
Heat Controller IR15S Fire or Explosion Hazard, Personal Injury Hazard, Personal Injury HAZARD-SERVICE, Installation & USE

IR15S specifications

The Heat Controller IR15S is an innovative heating solution designed to provide efficient and effective warmth in various environments. Its sleek design and advanced technology make it a popular choice for residential and commercial spaces alike.

One of the key features of the IR15S is its infrared heating technology. Unlike traditional heating systems that rely on convection, which warms the air, the IR15S heats objects and people directly. This results in a faster and more efficient heating experience, as warmth is felt almost instantaneously. The infrared heating process is also energy-efficient, contributing to lower energy bills.

The IR15S is equipped with a powerful 1500-watt heating element, making it suitable for medium to large rooms. Its adjustable thermostat allows users to set their desired temperature, ensuring optimal comfort throughout various seasons. The unit also features a convenient remote control, which enables users to adjust settings from across the room without having to get up.

Another notable characteristic of the IR15S is its safety features. The device includes an overheat protection mechanism that automatically shuts the unit off if it detects excessive heat, providing peace of mind for users and preventing potential hazards. Additionally, its cool-touch housing ensures that the exterior remains safe to the touch, reducing the risk of burns.

The integrated fan in the IR15S helps to distribute heat evenly throughout the space, enhancing overall efficiency. This fan can be adjusted to different speed settings, allowing users to customize airflow according to their preferences. The unit also operates quietly, making it an excellent choice for bedrooms or office environments where noise might be a concern.

Portability is another advantage of the Heat Controller IR15S. With its lightweight design and built-in handle, it can be easily moved from room to room. This feature makes it particularly useful for individuals who may need additional heat in specific areas of their home or workplace.

In conclusion, the Heat Controller IR15S stands out as a versatile heating solution, combining infrared technology, safety features, and user-friendly controls. Its ability to provide instant warmth while maintaining energy efficiency makes it an ideal choice for anyone looking to enhance their heating experience. Whether for personal use or in a larger setting, the IR15S is designed to meet the diverse needs of its users.