Checking the Drainage, Insulating the Pipe and Special Piping Applications
Insulating
the
Pipe
and
Special
Piping
Applications
Insulate the piping by wrapping the connecting portion of the indoor unit with insulation material and secure it with two kinds of vinyl tape.
•If you want to connect an additional drain hose, the end of the drain outlet should be routed above the ground. Secure the drain hose appropriately.
In cases where the outdoor unit is installed below the indoor unit perform the following:
1.Tape the piping, drain hose and connecting cable from down to up.
2.Secure the taped piping along the exterior wall using saddle or equivalent.
In cases where the Outdoor unit is installed above the Indoor unit perform the following.
1.Tape the piping and connecting cable from down to up.
2.Secure the taped piping along the exterior wall. Form a trap to prevent water entering the room.
3.Secure the piping onto the wall using a saddle or equivalent.
Seal a small |
| |
opening around |
| |
the pipings with | Taping | |
gum type sealant. | ||
Drain hose | ||
| ||
Plastic | Pipings | |
band | Connecting | |
| ||
| cable | |
| Power supply | |
| cord |
•Trap is required to prevent water from entering into electrical parts.
Seal a small opening around the pipings with gum type sealant.
Trap
Trap
Installation Manual 23
