Heat Controller VMC24SB-1/VMH24SB-1 Air volume control, Natural Air ControlAuto Wind, Chaos Swing

Part 2 Functions & Controls

4.3 Air volume control

•Indoor fan motor control have 6 steps.

•Air volume is controlled "SH", "H", "Med", "Low" by the remote con- troller.

•"LL" step is selected automatically in Hot start operation.

4.4 Natural Air Control(Auto Wind)

•When the Auto Step is selected, the high, medium, or low speed of the airflow mode is operated for 2~15 sec. randomly by the Chaos Simulation.

Step	Description
LL	Very low, In heating mode
L	Low
M	Med
H	High
SH	Super high
Auto	Natural wind

4.5 Chaos Swing

•By selecting Chaos swing, the horizontal vane automatically operates with a swinging motion or it is fixed to the desired direction.

4.6 Sleep mode Auto control

•Using the remote control, the sleep mode timer can be set for a time period of 1,2,3,4,5,6 or 7 hours. During this time period the unit will operate as described in sections 4.6.1 or 4.6.2, until the set time period has expired. Once the set time period has been reached, the unit will automatically turn off.

•When the appliance is on pause, the sleep timer mode cannot be input.

4.6.1 Sleep timer operation for cooling cycle

•While in cooling mode , 30 min. after the start of the sleep timer, the setting temperature increases by 1°C(2°F). After another 30minutes lapse, it increases again by 1°C(2°F).

Setting temp. (˚C)

Cooling ON temp. (Setting temp. +0.5˚C(+1˚F))

Cooling OFF temp. (Setting temp. -0.5˚C(-1˚F))

1.0˚C(2˚F) up

1.0˚C(2˚F) up

0.51 Sleep time (hour)

NOTE: Some Models are different by swing width and swing pattern.

- 13 -

Only for training and service purposes