General Safety Information
1. Installation and maintenance to be performed only by qualified personnel who are familiar with this type of equipment
2.Some units are pressurized with dry air or inert gas.
All units must be evacuated before charging the system with refrigerant.
Installation and Operations Manual
3. Make sure that all field wiring conforms to the requirements of the equipment and all applicable national and local codes.
4.Avoid contact with sharp edges and coil surfaces. They are a potential injury hazard.
5.Make sure all power sources are disconnected before any service work is done on units.
WARNING: Refrigerant can be harmful if it is inhaled. Refrigerant must be used and recovered responsibly.
Failure to follow this warning may result in personal injury or death.
Inspection
Responsibility should be assigned to a dependable individual at the jobsitetoreceivematerial. Eachshipmentshouldbecarefullychecked against the bill of lading. The shipping receipt should not be signed until all items listed on the bill of lading have been accounted. Check carefully for concealed damage. Any shortage or damages should be reported to the delivering carrier. Damaged material becomes the delivering carrier’s responsibility, and should not be returned to the manufacturer unless prior approval is given to do so.When uncrating, care should be taken to prevent damage. Heavy equipment should be left on its shipping base until it has been moved to the final location. Checktheserialtaginformationwithinvoice.Reportanydiscrepancies to your Heatcraft Refrigeration Products Sales Representative.
Warranty Statement
Seller warrants to its direct purchasers that products, including Service Parts, manufactured by SELLER shall be of a merchantable quality, free of defects in material or workmanship, under normal use and service for a period of one (1) year from date of original installation, or eighteen (18) months from date of shipment by SELLER, whichever first occurs. Any product covered by this order found to Seller’s satisfaction to be defective upon examination at Seller’s factory will at SELLER’s option, be repaired or replaced and returned to Buyer via lowest common carrier, or SELLER may at its option grant Buyer a credit for the purchase price of the defective article. Upon return of a defective product to SELLER’s plant, freight prepaid, by Buyer, correction of such defect by repair or replacement, and return freight via lowest common carrier, shall constitute full performance by SELLER of its obligations hereunder.
SELLER shall have no liability for expenses incurred for repairs made by Buyer except by prior, written authorization. Every claim on account of breach of warranty shall be made to SELLER in writing within the warranty period specified above – otherwise such claim shall be deemed waived. Seller shall have no warranty obligation whatsoever if its products have been subjected to alteration, misuse, negligence, free chemicals in system, corrosive atmosphere, accident, or if operation is contrary to SELLER’s or manufacturer’s recommendations, or if the serial number has been altered, defaced, or removed.
Seller makes no express warranties except as noted above. All implied warranties are limited to the duration of the Express Warranty. Liability for incidental and consequential damages is excluded.
The forgoing is in lieu of all other warranties, express or implied, notwithstanding the provisions of the uniform commercial code, the
SELLER makes no warranty, express or implied, of fitness for any particular purpose, or of any nature whatsoever, with respect to products manufactures or sold by seller hereunder, except as specifically set forth above and on the face hereof. It is expressly understood and agreed that SELLER shall not be liable to buyer, or any customer of buyer, for direct or indirect, special, incidental, consequential or penal damages, or for any expenses incurred by reason of the use or misuse by buyer or third parties of said products. To the extent said products may be considered "consumer products," As defined in Sec. 101 of the
The following conditions should be adhered to when installing this unit to maintain the manufacturers warranty:
(a)System piping must be in accordance with good refrigeration practices.
(b)Inert gas must be charged into the piping during brazing.
(c)The power supply to the unit must meet the following conditions:
A.Three phase voltages must be +/- 10% of nameplate ratings. Single phase must be within +10% or
B.Phase imbalance cannot exceed 2%.
(d)All control and safety switch circuits must be properly connected according to the wiring diagram.
(e)The factory installed wiring and piping must not be changed without written factory approval.
(f)All equipment is installed in accordance with
Heatcraft Refrigeration Products specified minimum clearances.
© 2008 Heatcraft Refrigeration Products LLC
