FEATURES
Pushbutton: A pushbutton with a diode already installed is provided for the front door
connection.
Manual Storage Slot: A convenient slot in the base has been provided to insert the manual
for future reference.
Volume Control: Turn the volume control clockwise to increase the volume or counter-
clockwise to decrease the volume.
Reset Button: This button has a dual purpose. 1) To return to the first tune in a Group when
using the Tune Selection Button to cycle through the tune selections. 2) To reset the chime
in case of power failure or surge.
Cover Pin: A notched cover pin is located on two sides of the chime base. These pins are
for selected covers which hang on the base.
Tune Selections: There are 63 tunes (divided into 9 groups of 7) available for the front door
and 2 tunes available for the rear door. The
Tune Selection Guide
can be found on page 28.
IMPORTANT INSTALLATION NOTES
•A diode connected to the front door pushbutton is required for this chime to operate. The enclosed
pushbutton has a diode factory installed to be used for the front door connection.
Note:
An additional diode is enclosed for use with other pushbuttons. See page 5 for installation
instructions.
•This chime must have a front door pushbutton with diode connected to operate properly.
IMPOR-
TANT:
The chime will operate with a front door connection only. The chime will not operate properly
with just a rear door pushbutton installed.
Illustrations may vary from
actual chime unit.
© 2003 DESA Specialty Products™ 598-1142-01
HardwiredMulti-TuneChime