![](/images/new-backgrounds/1041878/418789x1.webp)
3.To change the code, either:
•Add a jumper to the same location on both the push button and the chime or...
•Remove a jumper from the same location on both the push button and the chime or...
•Move a jumper on the push button from one location to another. Move the corresponding jumper on the chime to match the new location in the push button.
Example: Move jumper at location “5” to location “4” on both the push button and the chime.
Note: Code positions 1 through 7 must be exactly the same for both the push button and chime for this system to function.
Note: Unit will come factory set with jumpers in locations 5, 6, and 7 on the push button and on the chime (see Figure 9).
The range of the wireless chime can vary with location, temperature, and battery condition.
*Code Settings
tery
12 34
56
78
Ba
Inside Chime
12
34
56
78
Inside Push
Button
Add jumper for back door Ding or remove for front door Music Selection (for models with 2 push buttons only)
Note: Some models might require the use of tweezers to remove and replace the jumpers.
Figure 9