Heath Zenith 598-1226-01 Jumper On Two Left Pins for Mechanical Chime, Determining Correct Jumper

5.If you have an electronic chime, move the jumper on the back of your pushbutton from the two left pins to the two right pins (see Figure 3). Press pushbutton to test again.

6.If your chime still does not operate correctly, see Troubleshooting, page 5.

7.Once your pushbutton and chime are wired and functioning correctly, mount the pushbutton to the wall using the screws provided. Note: The pushbutton must be mounted with the lens facing downward.

Jumper On Two Left Pins for Mechanical Chime

UP

Jumper On Two Right Pins for Electronic Chime

UP

Figure 3 - Determining Correct Jumper

Position (Back of Pushbutton)

 598-1226-01