Completing Installation
1.Replace the decorative wall plate. In installa- tions where the Heath®/Zenith motion sensor switch is combined with other switches or outlets on an expanded box, you will need to purchase a combination wall plate. Various combination wall plates are available at home centers and electrical supply stores.
2.Slide the mode selection switch a couple times to make sure it moves freely.
Using Motion Sensor
Wall Switch
Mode Selection Switch
This switch allows you to select one of three modes of operation: OFF, AUTO, or ON.
OFF: Lights stay off.
AUTO: Lights automatically come on when mo- tion is detected. The lights will turn off 5 minutes after motion is no longer detected.
ON: Lights stay on continuously.
| SPECIFICATIONS |
Electrical Input | 120V, 60 Hz. |
Fluorescent Load | 30 Watts minimum, Up to 400 Watts Maximum Rapid Start |
Motor Load | Up to 1/8 HP Maximum |
Incandescent | Up to 500 Watts Maximum at 120VAC |
Fixed – 5 Minutes | |
Coverage | up to 10 ft. (3.5 m) at 110°, up to 20 ft. (6.1 m) in front of the sensor |
HeathCo LLC reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.