Use Optional | 5. Mount sensor. |
Spacer if Needed | Screw Mounting: Attach sensor back cover to |
| wall using two short screws (provided). Snap |
| sensor onto back cover. |
| Tape Mounting: Apply foam tape to the sensor |
| back cover. Stick sensor back cover to frame of |
| door in desired position. Snap sensor onto back |
| cover. |
| 6. Mount magnet. Repeat step 5 to attach magnet |
| (and spacer if needed) to door using two screws |
| (provided). Note: If using spacer, use the two |
| long screws (provided). |
- - |
