Heath Zenith CB-2010 manual Troubleshooting Guide, YOUR HEATH/ZENITH 15 YEAR LIMITED WARRANTY

Page 4

TROUBLESHOOTING GUIDE

If you experience a problem with your Light Control, first follow this guide. You may also want to visit our Web site at: www.desatech.com. For additional assistance call 1-800-858-85018:00 am to 4:30 PM Central Time, weekdays.

SYMPTOM			POSSIBLE CAUSE
Lights		will	1.	Light switch is turned off.
not come on.			2.	Flood light is loose or burned out.
			3.	Fuse is blown or circuit breaker is turned
				off.
			4.	Daylight turnoff is in effect (recheck after
				dark).
			5.	Incorrect circuit wiring, if this is a new
				installation.
			6.	Re-aim the sensor to cover desired area
Lights come			1.	Light Control may be installed in a rela-
on	in	day-		tively dark location.
light.			2.	Light Control is in Test. (Set control switch
				to an ON-TIME position.)
Lights come			1.	Light Control may be sensing small ani-
on	for	no		mals or automobile traffic (re-aim sensor).
a p p a r e n t			2.	Range is set too high. (Reduce Range
reason.				setting.)

SYMPTOM		POSSIBLE CAUSE
Lights stay on		1.	A flood lamp is positioned too close to the
continuously.			sensor or pointed at nearby objects that cause
			heat to trigger the sensor. (Reposition the lamp
			away from the sensor or nearby objects.)
		2.	Light Control is pointed toward a heat source
			like an air vent, dryer vent, or brightly-painted
			heat-reflective surface. (Reposition sensor.
			Reduce Range.)
		3.	Light Control is in Manual Mode. (Switch to
			Auto.)
Lights	flash	1.	Heat or light from the lamps may be turning the
on and off.			Light Control on and off. (Reposition the lamps
			away from the sensor.)
		2.	Heat being reflected from other objects may be
			affecting the sensor. (Reposition sensor.)
		3.	Light Control is in the Test mode and warming
			up. (Flashing is normal under these conditions.
			Turn Boost off.)
Lights	flash	1.	Sensor is detecting its own lights. (Reposition
once,	then		lamps to keep area below the sensor relatively
stay off in			dark.)
Manual Mode.

YOUR HEATH/ZENITH 15 YEAR LIMITED WARRANTY

This is a "Limited Warranty" which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.

For a period of 15 years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you. Light bulbs are not covered. To obtain a refund or a replacement, return the product to the place of purchase.

Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs and other expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, or unauthorized service.

This warranty covers only Heath/Zenith assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF DESA FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Retain receipt for warranty claims.