INSTALLATION

For easy installation, select an existing light with a wall switch for replacement.

Wall Mount

Eave Mount

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk 23456789012345678of electrical shock.

For eave mount only:

❒Swing the sensor head towards the clamp screw joint.

Controls

Clamp Screw

❒Then rotate the sensor head clockwise 180° so the controls face down.

Controls

Controls

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

WIRE THE LIGHT CONTROL.

❒Turn power off at the fuse or circuit breaker.

❒Remove the existing light fixture.

❒Install the mounting strap as shown using two screws that fit your junction box.

❒The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

❒Route the Light Control’s wires through the large gasket hole.

❒Twist the junction box wires and fixture wirestogether as shown. Secure with wire connectors.

Mounting

 

 

White to

Black to

 

Strap

Black

 

White

 

 

 

 

Rubber

Plug

Mounting

Bolt

Gasket

Junction box ground wire to green ground screw on fixture.

MOUNT THE LIGHT CONTROL.

❒Align the Light Control cover plate and cover plate gasket. Secure with the mounting bolt.

❒Push the Rubber Plug firmly into place.

❒If a wet location junction box was not used, caulk the wall plate mounting surface with silicone weather sealant.

To avoid water damage and elec- trical shock, keep lamp holders below horizontal.

 

 

Keep lamps at least

 

 

1" (2.5 cm) from the

 

 

sensor.Do not allow

Lock Nut

Lens

the lamps to block

 

the lens.

 

 

❒Adjust the lamp holders by loosening the lock nuts but do not rotate the lamp holders more than 180° from the factory setting. When screwing in the floodlamps, do not overtighten.

CAUTION: To avoid fire or burn hazards, keep fixture at least 2" (51mm) from combustible mate- rials. Do not aim at objects closer than 3' (1m).

2

598-1111-01

Page 1 Page 3
Page 2
Image 2
Heath Zenith CB-2011 manual Installation, Wall Mount, Wire the Light Control, Mount the Light Control
Page 1 Page 3

CB-2011 specifications

The Heath Zenith CB-2011 is an advanced and reliable wireless doorbell system designed to enhance your home's convenience and security. This product brings together modern technology and user-friendly features, making it a popular choice among homeowners seeking an efficient way to monitor their entrances.

One of the standout features of the CB-2011 is its impressive range. With a wireless operating distance of up to 150 feet, this doorbell ensures that you'll hear it ring, no matter where you are in your home. This extended range is particularly beneficial for larger homes or properties with multiple floors, providing peace of mind.

Another key characteristic of the Heath Zenith CB-2011 is its choice of tones. The system comes with a variety of selectable chimes, allowing users to personalize their doorbell experience. With different sounds to choose from, you can ensure your doorbell is distinctive, making it easier to recognize when someone is at the door.

In terms of design, the CB-2011 features a sleek, modern aesthetic that can complement various architectural styles. The clean lines and sophisticated finish make it not only a functional piece but also an attractive addition to your home.

Installation of the CB-2011 is straightforward and user-friendly. The wireless design eliminates the need for complex wiring or professional installation, allowing homeowners to set it up quickly and effortlessly. This feature is particularly appealing for those looking to upgrade their doorbell without extensive modifications to their existing setup.

The Heath Zenith CB-2011 also incorporates energy-efficient technology. The system is designed to conserve battery life, which means less frequent replacements and a lower environmental impact. This efficiency is achieved without sacrificing performance, ensuring that your doorbell remains reliable day after day.

Furthermore, the CB-2011 is built with durability in mind. Made with high-quality materials, it is designed to withstand various weather conditions, making it suitable for both indoor and outdoor use. This resilience ensures that your doorbell continues to function effectively, providing a consistent entry alert for years to come.

In summary, the Heath Zenith CB-2011 is an exceptional wireless doorbell that combines modern technology with practical features. Its impressive range, versatility in chime selection, easy installation, and durable design make it a top choice for homeowners looking to enhance their entrance experience. As you consider upgrading your doorbell system, the CB-2011 stands out as a reliable and stylish option.
Top Page Image Contents