TEST AND ADJUSTMENT
❒Turn on the circuit breaker and light switch.
NOTE: Sensor has about 1 1/2 minutes warm up period before it will detect motion. When first turned on, wait about 1 1/2 minutes.
❒Turn the RANGE control to the mid position (halfway between MIN and MAX) and the
RANGE
10 5 1 TEST |
| MIN MAX | MIN MAX |
10 5 | 1 TEST |
| |
MINUTES |
|
| |
Bottom of Sensor
Avoid aiming the control at:
•Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.
•Areas where pets or traffic may trigger the control.
•Nearby large,
8 ft. | 180° |
| |
(2.4 m) |
|
70 ft. |
|
(21 m) |
|
Maximum Range | Maximum |
| Coverage Angle |
NOTE: If fixture is mounted higher than 8 ft.(2.4 m), aiming the sensor down will reduce coverage distance.
The detector is most sensitive to motion across its field of view.
❒Loosen the clamp screw in theClamp
sensor ball joint and gently 
Screw
rotate the sensor. |
|
|
|
❒ Walk through the coverage |
|
| Ball |
|
| ||
area noting where you are |
|
| |
|
| Joint | |
when the lights turn on (also, |
|
| |
|
|
| |
the LED will flash several times |
|
|
|
whenmotionisdetected).Move |
|
|
|
the sensor head up, down, or |
|
|
|
sideways to change the cover- | Aim Sensor | ||
age area. | Down for Short | ||
❒ AdjusttheRANGEasneeded. | Coverage | ||
RANGE set too high may |
|
|
|
increase false triggering. |
|
|
|
❒ Secure the sensor head by tightening the clamp screw. Do not overtighten the screw.
❒ Set the amount of TIME you
want the lights to stay on after motion is detected (1, 5, or 10 minutes).
SPECIFICATIONS
Range . . . . . . . Up to 70 ft. (21 m) [varies with surrounding temperature].
Sensing Angle. . . . Up to 180°
Electrical Load. . . . Up to 500 Watts Maximum Tungsten.
Power Requirements. . 120 VAC, 60 Hz
Operating Modes. . . TEST, AUTO and MANUAL
MODE
Time Delay . . . . . 1, 5, 10 minutes Replacement lamp. . . T, 500W (or less) halogen 120
VAC
HeathCo LLC reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.
Motion
Motion
| Sensor |
Least Sensitive | Most Sensitive |
