TROUBLESHOOTING GUIDE

SYMPTOM

POSSIBLE CAUSE

 

 

 

Light will not

1.

Light switch is turned off.

come on.

2.

Bulbs are loose or burned out.

 

3.

Fuse is blown or circuit breaker

 

 

is turned off.

 

4.

Daylight turn-off is in effect (re-

 

 

check after dark).

 

5.

Incorrect circuit wiring, if this is

 

 

a new installation.

 

 

 

Light comes on

1.

Sensor may be installed in a

in daylight.

 

relatively dark location.

 

2.

Sensor is in Test. (Set control

 

 

switch to an ON-TIME position.)

 

 

 

Light comes on

1.

Sensor may be sensing small

for no apparent

 

animals or automobile traffic.

reason.

 

(Reduce sensitivity.)

 

 

 

SYMPTOM

POSSIBLE CAUSE

 

 

 

Light stays on

1.

There is a heat source like an air

continuously.

 

vent,dryervent,orbrightly-painted,

 

 

heat-reflective surface in the cover-

 

 

age area. (Install shield on sensor

 

 

in the direction of heat source.)

 

2.

Light control is in Manual Mode.

 

 

(Switch to Auto.)

 

3.

Light control is in DualBrite®

 

 

mode.

 

4.

Sensitivity is set too high.(Reduce

 

 

sensitivity.)

 

 

Light flashes on

1. Sensor is in the Test mode.(While

and off.

 

in TEST mode, light only stays on

 

 

for 5 seconds.)

 

 

 

Light does not

1.

Nearby large, light-colored objects

stay on in Man-

 

reflecting light may trigger the

ual mode.

 

shut-off feature.Do not point other

 

 

lights at the sensor.

 

 

 

Technical Service

Please call 1-800-858-8501 (English speaking only) for assistance before returning

product to store.

If you experience a problem, follow this guide.You may also want to visit our Web site at: www.hzsupport. com. If the problem persists, call* for assistance at 1-800-858-8501(English speaking only), 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC

P.O. Box 90004, Bowling Green, KY 42102-9004

ATTN: Technical Service

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

FIVE YEAR LIMITED WARRANTY

This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.

For a period of five years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you.

Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges.

This warranty covers only HeathCo LLC assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

REPAIR OR REPLACEMENT SHALL BETHE SOLE REMEDY OFTHE CUSTOMER ANDTHERE SHALL BE NO LIABILITY ON THE PART OF HeathCo LLC FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE.Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Please keep your dated sales receipt, it is required for all warranty requests.

598-1183-03

Page 6
Image 6
Heath Zenith SL-4300 warranty Troubleshooting Guide, Technical Service, No Service Parts Available for this Product

SL-4300 specifications

The Heath Zenith SL-4300 is a sophisticated and versatile motion-activated outdoor security light designed to enhance home safety while providing a range of convenient features. With an emphasis on reliability and functionality, the SL-4300 boasts several technologies that make it a preferred choice for homeowners seeking to enhance their outdoor lighting systems.

One of the standout features of the SL-4300 is its dual-head design, which allows for adjustable positioning of the light heads to illuminate various areas effectively. Each head can be pointed in different directions, ensuring maximum coverage of your outdoor spaces. This adaptability is crucial for monitoring large areas, such as driveways, patios, and gardens.

The motion detection technology employed by the SL-4300 is advanced and precise. It utilizes passive infrared (PIR) sensors to detect movement within a 180-degree field of view, offering a range of up to 30 feet. This ensures that any motion detected triggers the light, providing bright illumination to deter unwanted visitors and enhance safety during nighttime hours.

In terms of luminosity, the SL-4300 features energy-efficient LED bulbs that deliver substantial brightness while consuming minimal energy. The LED lights not only have a long lifespan, reducing the need for frequent bulb replacements, but they also lower electricity costs compared to traditional incandescent bulbs. With a luminous output that effectively lights up the space without harsh glare, the SL-4300 maintains a welcoming and secure atmosphere around the home.

Installation of the SL-4300 is simple, thanks to its user-friendly design. It comes with all the necessary mounting hardware and a clear instruction manual, making it accessible even for those with basic DIY skills. The unit is constructed from durable materials that can withstand varying weather conditions, ensuring longevity and consistent performance.

Another key feature of the SL-4300 is the adjustable timer and sensitivity settings. Users can customize the duration the light stays on after activation, ranging from a few seconds to several minutes. Additionally, sensitivity settings allow users to determine the threshold for triggering the light, which is particularly useful in reducing false alarms caused by animals or passersby.

In summary, the Heath Zenith SL-4300 is a state-of-the-art motion-activated outdoor security light that combines practical design elements, innovative technologies, and user-friendly features. With its superior motion detection system, energy-efficient LED lighting, adjustable settings, and durable construction, it stands as a robust solution for enhancing outdoor safety and security for any home.