Heath Zenith manual Operation, Model SL-5310, Features, Requirements, Mode Switching Summary

Professional Motion Sensor Quartz Security Light for Canadian Tire

Model SL-5310

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Photocell keeps the lighting off during daylight hours.

•LED indicates motion was sensed (day or night).

This package includes:

Cover Plate

Gasket

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec	x	x
Normal	1, 5, 10 min.		x
Manual	Until Dawn*		x
	* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put the ON-TIME switch on the	ON-TIME
bottom of the sensor in the TEST
position.
	TEST 1 5 10
AUTO
Put the ON-TIME switch in the 1, 5 or	ON-TIME
10 minute position.
	TEST 1 5 10
MANUAL MODE

	Halogen	6 Screws
		(3 sizes)
	Bulb
Cover
Plate
Sensor		3 Wire Nuts
Light Control	S-hook

Requirements

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5 or 10 position.

1 Second OFF

then...

... back on.

•The light control requires 120-volts AC.

•This fixture is designed for wall mounting only.

•If you want to use Manual Override, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

•The backplate has knockouts so the sensor can be mounted on most junction boxes.

•In some applications a universal adaptor plate may be needed. Adaptors are available at Home Centers and Electrical Supply Stores.

Mode Switching Summary

TEST Move ON-TIME Switch to 1, 5, or 10 minutes

	AUTO	Flip light switch
		off for one second
		then back on*
MANUAL MODE

*If you get confused while switching modes, turn the power off for one minute, then back on. After the cali- bration time the control will be in the AUTO mode.

© 2007 HeathCo LLC 598-1327-01