6
5 Care, Maintenance, Disposal
5.1 Care
Outer envelope and reflector should be cleaned at regul ar intervals to
ensure maximum light output.
Clean lamp components with a cloth soaked in normal household cleaner.
Check for compatibility of the washing solution with paints and plastics.
5.2 Maintenance
Always disconnect the lamp from mains supply whenev er you replace the
bulb or before performing any kind of service.
The unit may be repaired only by an authorized service center
representative, except changing the bulb.
5.3 Disposal
At the end of its useful life, the UV bulb has to be disposed of in
compliance with local regulations.
Defective bulbs are regulated as hazardous wastes.
6 Replace the UV Bulb
• Pull power plug to disconnect
the lamp from its power source.
• Squeeze the t wo locki ng lugs
which retain the outer
envelope (A).
• Pull the envelope off (B).
• Withdraw the bulb from the
handle (C).
• Insert new bulb in the socket.
• Slide envelo pe onto handle until
the two locking lugs engage.
7 Annex
7.1 Spare Parts
Pos. No. Description Loctite Order No.
1 UV Bulb 9W 97336
A
B
C