Depress lightly and turn manual lever on gas valve to the OFF position.
The gas pressure regulator on the automatic gas valve is factory set as follows:
@Natural: 3.5 inches water column. * Propane 10 0 inches water column.
e120 V, 50/60 Hz., 12 A, 1 PH
0 230 V, 50/60 HZ., 6 A, 1 PH
The gas fry station requires a 3 wire grounded service.
I W ING c
DO NOT DISCONNECT THE GROUND PLUG. This fry station MUST be adequately and safely grounded or electrical shock could result. Refer to local electrical codes for correct grounding procedures or in absenceof local codes, with the National Electrical Code, ANSO/NFPA No. 70 Latest Edition. Canadian models are supplied with a terminal box, suitable for conduit connection. In Canada, all electrical connections are to be made in accordance with CSA C22 1, Canadian Electrical Code Part 1, and/or local codes.
Servicing of the filter pump is done at the rear of the unit. If service is required, disconnect the fry station from the electrical power source. The fry station will have to be pulled out from the wall.to gain accessto rear.
