2.Press the F1 button until the track number that you want to move is displayed. Then, press the F3 button to choose the destination track number of the move function. In the example given in point 1, ‘TRK003’ will move to the ‘TRK002’ position.

3.Press the F2 button to move the track.

4.Once the move function has been completed, ‘Complete!’ will be displayed.

NOTE – If you want to cancel the move operation in the middle of the procedure, press either F3 or the STOP button. You can return the moved track back to its original position by going through move function again.

DISC & TRACK NAMING

You can label each MD disc and individual tracks with alpha-numerical characters.

1.Press the EDIT button until ‘NAME INPUT?’ is recalled.

NAME INPUT?

TRK001 YES TRK002

2.Press F1 to choose the track number that you wish to name. If you want to name the disc, rather than a track, continue pressing F1 until ‘DISC’ appears on the display.

3.Press F2 to set-up.

4.The digit furthest to the left on the display will start blinking to indicate that the digit is ready to edit. If the track or disc already had a title, this function can be over-ridden with a new title.

™

 

 

CHARA ^

SET

SHIFT

5. Press the F1, AMS ▲▲❙ or AMS ❙▲▲ buttons to scroll through available characters. Then press the F3, REW or FF buttons to shift the editing digit.

Pressing PLAY clears all the characters and the STOP button cancels the edit mode.

6.After you have completed entering the name, press F2 to set-up.

The following characters (and space) are available for naming discs and tracks:

ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 :;<=>?@^_`!"#$%&’()*+,-./

NOTE – Pressing F1 in play or stop modes will display the disc name, while pressing F2 displays the current track name.

23