2. Description
2.1 Correct use
The tool is an
en The working environment may be a construction site, workshop, occupied living accommodation or other work- space and the work carried out may include construc- tion, renovation or conversion. Use of the tool for cut- ting materials containing asbestos is not permissible.
The tool may be powered only by an electric supply pro- viding a voltage and frequency in compliance with the specification given on its rating plate.
The items supplied include:
–Electric tool incl. saw blade
–Operating instructions,
–Packaging
–Accessories (dust removal module,
3. Tools and accessories
Saw blade | |
Dust removal module | |
Dust removal adaptor | |
Hex. socket wrench | |
Dust removal hood |
3.1
3.1.1 General information
Location of identification data on the tool
The type designation and serial number can be found on the rating plate on the tool. Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department.
Type:WSJ-DRS
Serial no.:
3.1.2Safety
Use as directed
The
Use of the WSJ DRS for materials containing asbestos or for metal, glass and carbon fiber dust is not permis- sible.
Use of the
3.1.3General safety precautions
●When changing the filter, hold the tool and/or the WSJ- DRS so that the filter drawer can be pulled out verti- cally downwards. This prevents dust escaping.
●We recommend that breathing protection is worn when changing the filter.
3.1.4 Technical data
Power input | 80 W |
Suction performance | 400 l/min |
Weight | 250 g |
Dimensions (LxWxH) | 150x60x100 mm |
3.1.5Before use -NOTE-
The dust removal hood must be fitted in front of the saw blade when the dust removal module is in use (see 6.5).
Attaching the dust removal module
1.Unplug the supply cord from the electric socket.
2.Fit the dust removal adaptor into the opening on the tool.
3.Push the dust removal adaptor toward the tool from below until it engages.
4.Push the dust removal module onto the tool and the dust removal adaptor until it is heard to engage.
Detaching the dust removal module
1.Unplug the supply cord from the electric socket.
2.Press the two buttons on the dust removal module (one on each side) and hold them in this position.
3.Pull the dust removal module away from the tool and the dust removal adaptor toward the rear.
4.Release the dust removal adaptor from the tool by pushing it downwards.
5.Push the dust removal adaptor downwards and pull it out of the tool.
14
