25
“Off time”: you can set a length of time (unit: second), under stop status, if there was
no operations within this time; the player would power off automatically to save power.
Numeral 0 means the function is closes.
“Sleep time”: you can set a length of time (unit: second), under whatever status, if
there was no operations within this time, the player would power off automatically. This
function is suitable to using before sleeping. Numeral 0 means the function is closes.
Note: the “sleep mode” is valid only once after setting. It would clear the set
automatically after powering off. You have to set it again if you want to use it next time.
○ “Replay mode”
The operation measures please refer to the set of “Equalizer”.
“Manual mode” means it can not pause automatically during A-B repeat. It pauses at
the manually set position.
“Auto mode” means it pauses automatically during A-B repeat.
○ “Memory info”
The numeral is the total capacity of the disk. Percentage is the rate of the used space