Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.
Symptoms | Possible | Solutions | |
|
|
| |
TV will not turn on | Make sure the | power cord is correctly plugged in, then press [Power]. | |
The remote control batteries may be dead. Replace the batteries. | |||
| |||
|
|
| |
No picture, no sound | Check if the TV is turned off or turned into | ||
Check the Antenna/Cable connections. | |||
| Press [Display] to see if you have selected the right signal input. | ||
|
|
| |
No sound, picture OK | The sound may be muted. Press [Vol+] . | ||
The station may have broadcast difficulties. Try another channel. | |||
| Check the speakers cable connections. | ||
|
|
| |
Poor sound, picture OK | The station may have broadcast difficulties. Try another channel. | ||
Check the speakers cable connections. | |||
| Check if you have set the correct TV System. | ||
|
|
| |
Poor picture, sound OK | Check the antenna connections. | ||
The station may have broadcast difficulties. Try another channel. | |||
| Adjust the picture from the Picture Menu. | ||
|
|
| |
Unable to select a certain channel | The channel may be skipped. See SKIP on page 10. | ||
|
|
| |
|
|
| |
Poor colour or no colour | The station may have broadcast difficulties. Try another channel. | ||
Adjust the HUE and COLOUR in the Menu. | |||
| |||
|
|
| |
|
|
| |
The remote control does not operate | There may be an obstruction between the remote control and the | ||
remote control sensor. | |||
| The batteries may be installed with a wrong polarity. | ||
| The remote control batteries may be dead. Replace the batteries. | ||
| Check if you have entered TELETEXT mode. Press [Text] to quit. | ||
|
|
| |
Disorder display at power on
This may be caused by too short interval between power off and on. Unplug the power and restart.
