VIEWING A VIDEOCASSETTE
TO PLAY BACK A RECORDED TAPE
VIEWING A VIDEOCASSETTE
TO PLAY BACK A RECORDED TAPE
1.Insert the casette, arrow side forward, into the slot at the front of the TV/VCR Combination. The power comes on automatically and the tape indicator lights.
2.Press PLAY Button to start the tape.
3.Press STOP Button to end play.
To Fine Tune the Picture
Auto Tracking
Pressing PLAY starts the auto Tracking feature, which adjusts the tuning to eliminate static lines that may appear on the screen.
Manual Tracking
Scratched tapes or poorly recorded tapes may require additional picture adjustment. You can do this with the remote control.
If you press the MENU button when viewing a videocassette, the screen will appear as below.
Press the "3" key.
The TRACKING screen will appear.
Press the
Manual Tracking adjustment is intended for use during playback, slow motion, and STILL to minimize noise in the picture.
Rewinding the Tape
When you are done watching a video, you can rewind the tape automatically or manually. If the video cassette reaches the end of the tape, the TV/VCR Combination will stop and automatically rewind the video cassette. If you press POWER while the tape is rewinding, the power of VCR will shut off automatically after the tape has completely rewound.
Manual Rewind
Press STOP and REWIND buttons. The TV/VCR Combination rewinds the tape all the way to the beginning, then stops. Press STOP/EJECT on the TV/VCR Combination to release the tape.
30