BEFORE REQUESTING SERVICE
BEFORE REQUESTING SERVICECheck the following points once again if you are having some trouble with your TV/VCR Combination.
| Power | Correction |
No power | Check that the Power Plug is |
| completely connected to an |
| AC outlet. |
| Check that the Power button is set to |
| on. |
No picture or sound
Poor picture with normal sound
Poor sound with normal picture Poor TV reception
No color or poor color Ghosts (Multiple images)
TV programs can't be watched
`
VCRTV program can't be recorded
Timer recording can't be performed correctly.
There's no playback picture or the playback picture is noisy or contains streaks
Remote ControlTV/VCR Combination can't be remote controlled
Correction
At first, check antenna - its wires, connections, and direction. Then follow the corrections below.
Check that the power plug is completely connected to an AC outlet.
Check that the Power button is set to on.
Adjust the Brightness, Sharpness, and Contrast controls.
Adjust the Volume control. Adjust the Sharpness and Picture controls.
Adjust the Tint and Color controls. Install a directional antenna.
Make sure that the receiving channel of the TV/VCR Combination is memorized.
Correction
Check that the band selected is set to meet your antenna or cable TV system.
Make sure that the record tab on the back of the cassette is still intact. Set the recording start/stop time Make sure that the power turned off. Adjust the Tracking control slowly in either direction.
Correction
Aim the Remote Control directly at the remote sensor on the TV/VCR Combination.
Avoid all obstacles which may interfere with the signal path. Inspect or replace the batteries.
| Miscellaneous | Correction |
Video cassette can't be inserted | Insert the cassette with the window |
| side up and the record tab facing |
| you. |
44