Hitachi 26HDL52 Setting UP the Closed Caption, Setting UP the TV Channels

When a viewer attempts to watch a blocked channel, this message appears:

English

The channel will remain blocked until the correct lock code is entered.

SETTING UP THE CLOSED CAPTION

Closed Caption

For some TV programs, LCD has the de-coding and “Close Caption” functions. This caption is usually served for the deaf or the foreign language translation. All VCRs can record Close Caption signals from TV programs, so videos will also show the “Close Caption” function.

(a). Through OSD menu to set following these steps as below:

1.Press the MENU button on the remote control to bring up the OSD menu.

2.Continue to press the ▼ button until the System icon is highlighted and press the SEL button to show the system functions.

3.Use the ▲▼ buttons to highlight Caption and Text, and then press the SEL button.

4.Use the following table to set up your Closed Caption.

Closed Caption	Function	Options
Caption	Select the Caption mode	CC1, CC2, CC3, CC4
Text	Select the Text mode	TT1, TT2 , TT3, TT4

(b) Hot key on remote controller:

Directly press C.C. key to set Closed Caption. The sequence is following: Caption > Text > Off .

SETTING UP THE TV CHANNELS

Initial Setup

Use the TV Channel Setup feature to set up your channels. The Channel Auto Search scans channels 1 to 125 and adds the channels that return a signal. You also can use the Channel Edit feature to add and remove channels that fit your preference.

Use the following steps to set up your TV channels:

1.Press NTSC button to select AIR or CATV

2.Press the MENU button on the remote control to bring up the OSD menu.

3.Use the ▲▼ buttons to highlight the Initial Setup function, and then press the SEL button to view the options.

4.Press the ▼ button once to highlight Auto Channel Scan, and then press the SEL button to begin the search. Channels 1 to 125 are scanned and the channels that return a signal are added to your channel list.

5.Press the EXIT button on your remote control to return to your TV display.

Auto Channel Scan	Function	Options
Tuner Mode	Select your TV input source.	Air, CATV
Start	Automatically search scan TV channel from 1 to 125	Auto

Use the following steps to add and remove channels:

1. Press the MENU button on the remote control to bring up the OSD menu.

35