Hitachi 26LD9000TA Connecting the plug into the wall socket, Information How to secure the cable

CONNECTION (continued)

Connecting Procedure (continued)

Headphone The detail settings can be adjusted from Audio Menu on page 29 .

(Mini Stereo Plug)

The audio from the speaker will be muted when connecting the headphone to this terminal.

4. Connecting the plug into the wall socket

Connect the Power Cord after completing all other connections. (The type of plug is different from this drawing for some countries.)

(1)Connect the power cord to this device.

(2)Fix the power cord cable to the clamp.

(3)Connect the power cord to the power outlet.

CAUTION

ƔUse only the Power Cord provided.

ƔDo not use a power supply voltage other than that indicated (AC110-240V, 50/60Hz). It may cause fire or electric shock.

ƔFor the LCD panel, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure to connect the Power Cord to a three-pronged grounded outlet and make sure that the cord is properly grounded. If you use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.

ƔEnsure that both ends of power cord are easily accessible.

ƔIf you have to change the power cord, please use the certified power cord that meets your region’s safety standard.

Information

ƔHow to secure the cable

After connecting all of the cable to the terminals, sevure them with the band.

When you secure the cables, please be careful not to tignten too much.

18