4 Press MENU and SECRET No. is registered. 
To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1 "V-CHIP HAS BEEN ACTIVATED" will be displayed if you watch the program with Program Rating data the same as you configured.
NOTE:
• "V-CHIP HAS BEEN ACTIVATED" will not be displayed if STATUS is not configured to "ON".
2 Press MENU, then "ENTER SECRET No." will be displayed.
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET No. is chosen "SECRET No. IS INCORRECT" will be displayed. Enter the SECRET No. again in this case.
NOTE:
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1 Repeat steps 1-3 of [1] MPAA RATING, then "ENTER SECRET No. will be displayed.
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD and the V-CHIP BLOCK select mode will be displayed. Repeat configuration of the V-CHIP BLOCK.
