OPERATION OF REMOTE CONTROL

PANASONIC

04,44

PENTAZX

01,05

 

 

 

 

PHILCO

04,05

PHILIPS

04,05,08

 

 

 

 

QUASAR

04

RCA

01, 07, 33

 

 

 

 

Realistic

02, 06, 10, 24

Samsung

23, 31

 

 

 

 

Sanyo

14, 10

Scott

20

 

 

 

 

Sears

01, 11, 24

Sharp

06, 02, 03

 

 

 

 

Shintom

36

Sony

12, 13, 38

 

 

 

 

Sound Design

29

Sylvania

04,05,08

 

 

 

 

Symphonic

29

Tatung

15

 

 

 

 

Teac

15, 29

Teknika

27, 29

 

 

 

 

Thomas

29

TMK

21

 

 

 

 

Toshiba

19, 20

Video Concepts

30

 

 

 

 

Yamaha

15, 29, 30

Zenith

16

 

 

 

 

(1)Slide TV-CATVswitch to TV.

(2)Press and hold down RECALL and CH DOWN () on your remote control. Then release both buttons.

(3)Within ten seconds after releasing RECALL and CH DOWN (), enter your VCR's two-digit remote control code number using REMOTE KEYPAD (refer to list).

• The remote control is now ready to send commands to your converter.

Some brands have more than one remote code listed due to changes in the remote codes from early to later model years. In such cases, you may have to try more than one code to find the code your converter accepts.

NOTE:

Depending on the model, year produced, brand, and type of CATV converter, some models may not be compatible with the remote control.

￿TO IDENTIFY YOUR CABLE CONVERTER - SEARCH METHOD.

(1) Slide TV-CATVswitch on the remote to TV.

(2) Press POWER on the cable converter to On.

(3) Stand at least six feet away from the converter. Point the remote towards the converter.

Hold down RECALL and CH UP () at the same time. KEEP HOLDING THE BUTTONS DOWN.

(4)Watch the Channel Number indicator on the converter. Channel numbers will scan up when the converter has been identified.

Release the RECALL and CH () as soon as the channel numbers start to scan up.

The converter's remote control code number has been identified, and the remote is ready to operate the converter

TIPS ON IDENTIFYING YOUR CABLE CONVERTER:

Be Patient: a minute or two can seem a lot longer when you're waiting for something to happen, but the code should be identified within two minutes. Remember, it is only a one-time set-up.

Be careful not to let the CATV converter scan more than five channels when the indicator starts to move

41