Hitachi 32GX01B, 32UX01S, 36GX01B, 36UX01S Connecting a Stereo VCR or Stereo Laserdisc Player

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER

1.Connect the cable from the VIDEO OUT of the VCR of the laserdisc player to the INPUT (VIDEO) jack on the TV set below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT(AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT(AUDIO/L) jack.

4.Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears automatically after approximately eight seconds.

5.Press the INPUT button to return to the previous source.

INPUT 1

S-VIDEO

VIDEO R L / (MONO)

AUDIO

S-VHS V R L

OUTPUT

BACK OF VCR

HITACHI MODEL or similar model

NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be abnormal if the connection is loose.

If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable.

17