4.Use the ▲▼ buttons to select a channel to add or erase.
5.Use the▲▼ W X buttons to highlight Add or Erase. Press the SEL button to add or erase the current channel.
6.Press the EXIT button on your remote control to return to your TV display.
When a viewer attempts to watch a blocked channel, this message appears:
English
The channel will remain blocked until the correct lock code is enter
SETTING UP THE MANUAL TUNING
Manual Tuning
Due to the weak TV channel signal , some of the channels may not be tuned correctly. With the fine tune function , you can tune in each channel precisely which has poor picture.
Use the following steps to manual adjust:
1.Press channel selector button to select channel number.
2.Press the MENU button on the remote control to bring up the OSD menu.
3.Use the ▲▼ buttons to highlight the Initial Setup function, and then press the SEL button to view the options.
4.Press the ▼ button once to highlight Manual Tuning, and then press the SEL button to begin the adjustment.
5.Use the W X buttons to fine tune the program.
6.Press the EXIT button on your remote control to return to your TV display.
37
