FUNCTION (continued)
Audio Switching
Sound Multiplex (TV mode)
You can make optimum use of available audio by pressing
bottom of remote control. Audio can be switched only if receiving sound multiplex signals; otherwise, pressing this button will have no effect, such as when only mono sound is received.
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
Bilingual/Dual Sound broadcast
Bilingual broadcast is the broadcast available on the main and sub languages, while dual sound broadcast is available on the primary and secondary sounds; for example, some sports programs contain broadcast commentary on a game as primary sound, and a commentary about a team as the secondary.
When bilingual program is received, sound mode display appears in yellow as shown. Each time
button is pressed, the display is switched in the sequence of following.
Sound multiplex signal
Yellow
ˮ˜˰
YellowGreen
ˮ˜˜˰
[I]…Main language/Primary Sound [II]...Sub language/Secondary Sound
ź…force mono: This selects main language or primary sound.
Stereo broadcast
With stereo broadcast, you can enjoy different sound from either side.
When a stereo program is received, sound mode display will appear in red as shown.
Press
button to switch between stereo and mono sound.
Sound multiplex signal
Red
ʳ
Green
…Stereo
…...Force Mono
NOTE
zPlease select ź (force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that you can receive a clear mono sound.
zrepresents the Mono broadcast.
34
Downloaded From
