TROUBLESHOOTING(continued)
Symptom and Check List (continued)
Symptoms |
| Check list | Page | ||||
|
|
|
|
|
| ||
z No picture |
| z Check if the Power Cord is plugged into the socket firmly. | 14 | , | 19 | ||
The Indicating lamp | Off | z Check if the Main Power is ON. | |||||
|
|
| |||||
|
|
|
|
|
| ||
|
| z Check if all the cables of the external equipments are connected |
|
|
| ||
z No picture |
| correctly and firmly. |
|
|
| ||
| z Check if the power of the external equipments is ON. |
|
|
| |||
The Indicating lamp | Orange |
|
|
| |||
z Check if the TV/AV mode has been selected correctly. |
| 35 |
| ||||
It means that the unit is in “Power Save |
|
| |||||
z Check if the PC is in Power Save mode or not. |
|
|
| ||||
mode”. |
|
|
|
| |||
| z Refer to “Power Save mode” and “When following messages appears |
|
|
| |||
|
|
|
|
| |||
|
| on the screen” |
|
|
| ||
|
|
|
|
|
| ||
z No picture |
| z Check if the signal cable is connected correctly and firmly. | 14 | ~ 18 | |||
The indicating lamp | Green | z Adjust the level of Brightness and Contrast lower. | |||||
|
|
| |||||
|
|
|
|
| |||
z The top of the television and surface of | z It may happen when you use the unit for long hours. Turn off the Main | 39 | , | 41 | |||
the panel heat up. |
| Power of the unit for a while. Please note that this is not malfunction. | |||||
|
|
|
| ||||
|
|
|
|
| |||
z Image cannot be displayed in the correct | z Press | button to check if the input signal of the displayed image is | 25 , | 39 , | |||
position. |
| compatible with the specification of the television. |
| 41 |
| ||
|
|
|
|
|
| ||
z When the VCR is in special playback | z It could happen when the VCR is connected to Component output, |
|
|
| |||
features (Fast forward or Rewind), the |
|
|
| ||||
such as 480i. This is not malfunction. |
|
|
| ||||
screen gets dark and cannot see the |
|
|
| ||||
z Try Composite output or |
|
|
| ||||
image at all. |
|
|
|
| |||
|
|
|
|
|
| ||
zThe display size is fixed at “Full” when the receiving signals are
z Screen display size cannot be switched | 1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz. | ||
| 32 , 33 | ||
correctly. | z Check the signal status by pressing the | ||
button on the remote | |||
| control. |
| |
zCheck if the cables are connected correctly.
z Cannot be displayed the image from HDMI. | z Check the output format of the equipments. | 40 | ~ | 41 |
| z (Please refer to “Connecting Procedure” and “Recommended Signal | |||
|
|
|
| |
| List”.) |
|
|
|
ENGLISH
37
Downloaded From
