-8-
BeforeSw itching On YourTV

Power Connection

IMPORTANT: The TV set is designed to op-
erateon220-240V AC,50 Hz.
•After unpacking, allow the TV set to reach the
ambientroom temperature before you con-
nectthe set to the mains.

Connections To The Aerial Input

Socket

VHF/UHF
75
:
REAROF THE TV
CABLETV
• Connectthe aerial or cable TV plug to the
Aerial input socket located at the rear of the
TVa nd connect the cable plug coming out
from the TV out socket located on the de-
vices(VCR, DVB etc.) to this socket as well.

How To Connect Other Devices

IMPORTANT: Switch off the TV before con-
nectingany external device.
Sockets for external connectionsare at the
rear side of the TV.For conn ection of other
devices via Scart refer to the manuals of the
related devices.

Inserting Batteries In The Remote

Control Handset

• Removethe battery cover located on the
back of the handset by gently pulling down-
wardsfrom the indicated part.
•Insert two AA/R6 or equi valent type batteries
inside. Place the batteries in the right dir ec-
tions.
•Replace the battery cover.
NOTE: Remove the batteries from remote
control handset when it is not to be used for
a long period.Otherwise it can be damaged
due to any leakage of batteries.
Switching The TV ON/OFF

To switch the TV on:

YourTV will switch on in two steps:
1- Connect the power supply cord to the sys-
tem.Press On/Off switch “ ”at the bottom
rightside o f the TV.Then the TV switches it-
self to stand-by mode and the led on the
frontof the TV becomes Red.
2- Toswitch on the TV from stand-by mode
either:
Press a digit button on the remote control so
that a programme number is selected,
or,
Press the " "or" " button at the bottom of
the TV or press the “P-”or “P+” button on
the remote control, so that last mode
switched off is selected.
By either method the TV will switch on and
the led becomes green.

Tosw itch theTV off:

•Pressthe“ (stand-by)”b utton on the re-
motecontrol,sotheTVwillswitchtostand-
bymode and the GREEN LED will become
RED.
To power down the TV completely, press
On/Offswitch “ ”,
or,
Unplug the power cord from the mains
socket.
Downloaded From TV-Manual.com Manuals