Hitachi 42V525 important safety instructions Accessories, First Time USE

ACCESSORIES

FIRST TIME USE

Check to make sure you have the following accessories before disposing of the packing material.

REMOTE CONTROL	BATTERIES	OPTIONAL LCD STAND
	(“AA”)

LCD STAND: SP42WB

PART NO: QJO1542

1. 2.

CAUTION: This SP42WB LCD stand for use only with Hitachi 42V525. Use with other apparatus is capable of resulting in instability causing possible injury.

1.Remote Control Unit CLU-4341UG2 (Part No. HL02071) or Remote Control Unit CLU-4351UG2 (Part No. HL02072).

2.Two “AA” size, 1.5V batteries (For Remote Control Unit).

REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT

1.Open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the cover off.

2.Insert two new “AA” size batteries for the remote control. When replacing old batteries, push them towards the springs and lift them out.

3.Match the batteries to the (+) and (-) marks in the battery compartment.

4.Replace the cover.

BOTTOM VIEW (Remote Control)

Lift up on tab to remove back cover.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace with the same or equivalent type.

4