30
The Remote Control
OPERATING THE PRECODED
FUNCTION FOR YOUR DVD PLAYER.
This remote is designed to operate different types of
DVD players. You must first program the remote to
match the remote system of your DVD player (refer
below for pre-codes).
1. Turn ON your DVD player.
2. Aim the remote control at the front of your DVD
player.
3. To switch to DVD pre-coded mode, press and
release the DVD button.
4. Hold down the DVD button on the remote and
enter the two digit preset code that matches your
DVD player, as shown below. Release the DVD
button.
5. Aim the remote at the DVD player and press the
POWER button. The remote will turn off your DVD
player when the correct two digit preset code is
entered. When this occurs, the remote control is
programmed for your DVD player. If the DVD player
does not turn off, try a different two digit preset
code.
6. The remote will now control your DVD player.
7. You will need to set the display type of your DVD
player to 16:9 WIDESCREEN.
NOTE: 1. If your DVD player cannot be operated
after performing the above procedures,
your DVD player’s code has not been
precoded into the remote.
2. In the unlikely event that your DVD player
cannot be operated after performing the
above procedures, please consult your
DVD player operating guide.
3. The remote control will remember the
codes you have programmed until the
batteries are removed from the remote
control. After replacing the batteries
repeat the entire programming procedure
as stated above.
DVD button
This button allows the remote to control your DVD
player by setting it to DVD mode.
PRECODED DVD Buttons
These buttons transmit the chosen precoded DVD
codes.
EXCLUSIVE TV Buttons
These buttons are for operating the TV.
DVD BRAND CODES
APEX ............................................................................09
GO VIDEO ................................................................... 08
HITACHI........................................................................00
KENWOOD...................................................................10
PANASONIC.................................................................02
PIONEER..................................................................... 03
RCA............................................................................. 04
SAMSUNG ...................................................................06
SANYO.........................................................................07
SONY ...........................................................................01
TOSHIBA......................................................................05
MY DVD PLAYER CODE IS:______________________
NOTE: Refer to instruction manual of the DVD player
for operation of the buttons exclusively for
the DVD player.
The Remote Control for DVD FunctionsTV
SATCBLVCRDVD
EXIT
DAY/NIGHTPIPASPECTINPUTS
MENU
SELECT
INFO
MUTE
GUIDE
LAST CH
FAV
CH
CLU-4361S
VOL CH
쐋
쐋