55
On-Screen Display
Upgrades
It shows software information and easy upgrade
procedure. This function allows the TV software to be
upgraded by using a flash card (MMC CARD). If a
future software upgrade is required for your TV,
HITACHIwill notify and provide you with a flash card.
In order to receive written notification and the flash
card, please complete and return the warranty card.
1. Insert MMC CARD
2. Press the CURSOR buttons or to highlight
UPGRADE NOW.
3. Press the SELECT button to select and start
upgrading.
4. Unplug the power cord when the upgrade is
complete.
NOTE: Any power interruption during the upgrade
process will cancel the upgrade. When this
happens, repeat the upgrade procedure.
Quick Start Up
This feature will select QUICK START UPoptions. Set
this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on.
Set this feature to OFF to save electricity. Selecting ON
for the QUICK START UPfeature will activate the TV
tuners circuits when the TV is in “standby mode” which
is commonly referred to as “off”. This will allow you to
quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will
monitor any changes and prepare the television to
quickly present a picture. A small amount of electricity
is used to continually monitor signals when this feature
is selected.
Set The Inputs
Lamp Power Control
Set Closed Captions
Menu Preference
Upgrades
Set Monitor Out
Quick Start Up
Setup
Move SEL Set
Quick Start Up
Setup
Move SEL Return
Select ON to have the TV tune
channels quickly at 1st turn on.
Select OFF to save electricity
Off On
OR
Set The Inputs
Lamp Power Control
Set Closed Captions
Menu Preference
Upgrades
Set Monitor Out
Quick Start Up
Setup
Move SEL Set
Upgrades
Setup
Move SEL Return
Software Version # : Main Vxxxx.xxxx
MMC Software Upgrade
Upgrade Now
Please Insert MMC card
before upgrading.
OR
Setup