Lamp Replacement
3.Loosen the screw securing the lamp unit with a Phillips head screw driver as shown. Remove the lamp unit by holding the lamp handle , then pulling outwards.
PULL OUTWARDS
THE LAMP UNIT
LAMP UNIT
Turn counterclockwise to loosen the lamp unit screw.
LAMP UNIT
Lamp Replacement
CAUTION: The lamp is very hot and may cause fire or severe burns. Wait at least 30~45 minutes to allow the lamp to cool before proceeding with lamp removal.
NOTE: Do not put your hand in the Lamp Storage area after the Lamp Unit is removed, your may get burned.
4. Replace with the new lamp.
Place the removed lamp into the empty box of the replacement lamp. Do not touch the front glass of the new lamp or its receptacle. This may shorten the life of the lamp and reduce the picture quality.
•Push the lamp unit back to its original position.
•Tighten the screw firmly on the lamp unit. If it is loose, the TV may not operate correctly.
PUSH INWARDS | HANDLE |
THE LAMP UNIT |
|
LAMP UNIT
Turn clockwise to tighten the screw of the lamp unit.
58
