55
On-Screen Display
Setup
Set The Quick Start Options
This feature will select QUICK START UPoptions. Set
this feature to ONto have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on.
Set this feature to OFFto save electricity. Selecting ON
for the QUICK START UPfeature will activate the TV
tuners circuits when the TV is in “standby mode” which
is commonly referred to as “off”. This will allow you to
quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will
monitor any changes and prepare the television to
quickly present a picture. A small amount of electricity
is used to continually monitor signals when this feature
is selected.
Reset The Software
SetTheQuick Start Options
Setup
Move SEL Select
Select ON to have the TV tune
channels quickly at 1st turn on.
Select OFF to save electricity
Off On
Set The Inputs
SetThe Power Saving
OR
SetThe Closed Captions
SetThe Menu Options
CableCARDInformation
SetThe Output Terminals
SetTheQuick Start Options
Setup
ResetThe Software
Move SEL Select
Set The Inputs
SetThe Power Saving
OR
SetThe Closed Captions
SetThe Menu Options
CableCARDInformation
SetThe Output Terminals
SetTheQuick Start Options
Setup
ResetThe Software
Move SEL Select
This feature shows software information and easy
upgrade procedure. This function allows the TV
software to be upgraded by using a flash card (MMC
CARD). If a future software upgrade is required for your
TV, HITACHIwill notify and provide you with a flash
card. In order to receive written notification and the
flash card, please complete and return the warranty
card.
1. InsertMMC CARD
2. Press the CURSORPAD or to highlight
UPGRADE NOW.
3. Press the SELECTbutton to select and start
upgrading.
4.Unplug the AC power cord or press the POWER
button in the Front panel for 5 sec. when the
NOTE: Any power interruption during the upgrade
process will cancel the upgrade. When this
happens, repeat the upgrade procedure.
ResetThe Software
Setup
Move SEL Return
SoftwareVersion # : Main Vxxxx.xxxx
MMCSoftware Upgrade
Upgrade Now
PleaseInsert MMC card before upgrading.
ResetTV Settings
No Yes
OR
Reset TV Settings
This function allows you to Reset all TV Settings to the
original factory settings on all modes duriong the next
2. Press the SELECT button or CURSORPAD to
select Reset The Software.
3. Use the CURSORPAD to access at the Reset
softkey.
4. Press the SELECT button to Reset the TV Settings
power on/off.
1. Use CURSORPAD , to highlight functions.
(Select"Yes" to return all settings to the factory
defaultafter main power OFF/ON.)
NOTE: If YES is selected, ALL TV MENU SETTINGS will be reset to the original factory settings on all
modes during the next power on/off.
and unplug the AC power cord or press the POWER button in the front panel for 5 sec.
UPGRADE is complete.