Hitachi 53SBX10B manual Connecting a Component Source to Video 4 Y-PBPR, Back

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A COMPONENT SOURCE TO VIDEO 4: Y-PBPR.

1.Connect the cable from the Y OUT of the Laserdisc/DVD player to the INPUT (Y) jack, as shown on the TV set below.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the Laserdisc/DVD player to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player to the INPUT (AUDIO/L) jack.

6.Press the INPUT button to view the program from the Laserdisc/DVD player. The VIDEO icon disappears automatically after approximately eight seconds.

7.Press the INPUT button to return to the previous channel.

DVD Player

Hitachi Model or

Similar Model

	OUTPUT				Back of
	VIDEO		AUDIO		DVD Player
PR/CR PB/CB Y		L		R

		ANT A
		TO
		CONVERTER
			S-VIDEO	S-VIDEO			S-VIDEO
		ANT B	VIDEO	VIDEO	Y/VIDEO		VIDEO
			(MONO)	(MONO)	PB	(MONO)	L
			L	L		L
					PR
AUDIO TO HI-FI			R	R		R	R
			AUDIO	AUDIO		AUDIO	AUDIO
R	L
			INPUT 1	INPUT 2	INPUT 4		MONITOR
							OUT

Rear Panel of Television

NOTE: 1. You may use standard video signal or 480i signal for INPUT:4.

2.Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

3.See page 12 for tips on REAR PANEL CONNECTIONS.

18