Hitachi 61UWX10BA, 53UWX10BA, 61SWX10B Genius Remote Control, Light Button

THE GENIUS REMOTE CONTROL

In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with one touch. Basic operation keys are grouped together in one area.

To operate your TV, point the remote control at the remote sensor of the TV and press the TV button. The TV button will blink, indicating that the remote will now control your television.

To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The VCR button will blink, indicating that the remote will now control your VCR. (See page 30 for instructions on how to program the remote to control your VCR.)

To operate your cable box, point the remote at the remote sensor of the cable box and press the CABLE (CBL) button. The CBL button will blink, indicating that the remote will now control your cable box. (See page 31 for instructions on how to program the remote to control your cable box.)

To operate your set-top-box or satellite receiver point the remote at the remote sensor of the set-top-box and press the SET-TOP- BOX (STB) button. The STB button will blink, indicating that the remote will now control your set-top-box. If you have a satellite receiver, use this button to prorame your satellite receiver. (See page 32 for instructions on how to program the remote to control your set-top-box.)

To operate your DVD player, point the remote at the remote sensor of the DVD player and press the DVD button. The DVD button will blink, indicating that the remote will now control your DVD player. (See page 33 for instruction on how to program the remote to control your DVD player.)

To operate additional audio/video equipment, point the remote at the remote sensor of the component you wish to control and press the AV1, AV2 or AV3 button. This button will blink, indicating that the remote will now control the desired component. (See page 34 for instructions on how to program the remote to control additional Audio/Video equipment.)

POWER

TV	VCR				CBL		STB
	SOURCE WIZARD
DVD	AV1				AV2		AV3
1				2		3
4				5		6
7				8		9
SLEEP				0			LAST CH
C.C.				HELP	ASPECT		PIX
ANT
	MENU			EXIT
VOL		SELECT				CH
SVCS	M	UTE		STATUS		SCHD
VCR	PLUS+
VID1				INFO	GUIDE/TV		VID	5
VID 2				VID 3	VID	4
PIP			PIP CH			FREEZE
				PIP ACCESS
PIP MODE			SWAP
PROG		TV/VCR				SLOW

REC

CLU-5711TSI

POWER

TV	VCR				CBL		STB
	SOURCE WIZARD
DVD	CD				TAPE		AMP
1				2		3
4				5		6
7				8		9
SLEEP				0			LAST CH
C.C.				HELP	ASPECT		M
ANT
								ODE
	MENU			EXIT
VOL		SELECT				CH
SVCS	M	UTE		STATUS		SCHD
VCR	PLUS+
VID1				INFO	GUIDE/TV		VID	5
VID 2				VID 3	VID	4
PIP			PIP CH			FREEZE
				PIP ACCESS
PIP MODE			SWAP
PROG		TV/VCR				SLOW

REC

CLU-5713TSI

These buttons allow the remote to control your TV, VCR, cable box, satellite receiver, DVD player, or other Audio/Video equipment depending on which mode is chosen, as explained above.

,LIGHT BUTTON

When you are in a dark room, press the light button on the remote to light up the buttons shown in and the source button will blink. The light will stay on for about 8 seconds if the light button is not pressed again. These buttons will not appear to light if the room is too bright.

NOTE: 1. Your remote control “SOURCE WIZARD” buttons are either labeled as “AV1, AV2 and AV3,” or “CD, TAPE, and AMP.” If your remote control “SOURCE WIZARD” buttons are labeled as “AV1, AV2, and AV3,” please program your Audio/Video components as follow for best performance. Use “AV1” to program your CD brand. Use “AV2” to program your TAPE brand, and use “AV3” to program your AMPLIFIER/RECEIVER brand.

AV1-Use for CD brand

AV2-Use for TAPE brand

AV3-Use for AMPLIFIER/RECEIVER brand.

SOURCE WIZARD

AV1	AV2
DVD	AV3

2.Your remote control button to directly access the THEATER MODE is either labeled as “PIX” or “MODE”.

23