Hitachi 57T500A First Time Use, CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2 Y-PBPR, 65T500

FIRST TIME USE

CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR.

1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.

6.Press the VID1~VID2 button, to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO label disappears automatically after approximately four seconds.

7.Press the ANT button to return to the previous channel.

FIRST TIME USE

			DVD Player
				OUTPUT
		PR	PB	Y	L	R
Models: 57T500
65T500
ANT A
				DVI-HDTV
		PR	PB	Y
	INPUT 1
TO		R	(MONO)/L
CONVERTER
			PB	Y/VIDEO
ANT B	INPUT 2	R	(MONO)/L
				AUDIO
		R	(MONO)/L	VIDEO		S-VIDEO
	INPUT 3
AUDIO
TO HI-FI		R	(MONO)/L	VIDEO
CENTER						S-VIDEO
	INPUT 4
IN
IR			L
BLASTER		R		VIDEO		S-VIDEO

L	MONITOR
	OUT

AUDIO

R

			DVD Player
			OUTPUT
		PR	PB	Y	L	R
Models: 57X500
65X500
ANT A
		PR	PB	Y	DVI-HDTV	DVI-HDTV
	INPUT 1
TO		R	(MONO)/L
CONVERTER
			PB	Y/VIDEO
ANT B	INPUT 2	R	(MONO)/L
				AUDIO
		R	(MONO)/L	VIDEO		S-VIDEO
	INPUT 3
AUDIO
TO HI-FI
CENTER		R	(MONO)/L	VIDEO		S-VIDEO
	INPUT 4
IN
IR
BLASTER		R	L	VIDEO		S-VIDEO

LMONITOR

OUT

AUDIO

R

NOTE: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2. See page 13 for tips on REAR PANEL CONNECTIONS.

19