Hitachi 61UWX10B Set Up, Aspect Style, Fill, V. Position, Component Color Type, Video Display

SETUP

SET UP

	ASPECT STYLE
Fill	This function allows you to select when receiving either NTSC or
	SDTV. Full screen picture is available in this mode when
	receiving letterbox signal. Both vertical edges will be hidden if you
	select Fill for ordinary 4:3 picture.

Smooth Wide This function allows you to select when receiving either NTSC or SDTV signal. 4:3 picture is expanded horizontally as being close to both left and right sides. It keeps 4:3 ratio in the center of the picture, then expands as it is close to both left and right edge of the picture to show picture distortion minimized. This function allows you to watch picture without side panel for 4:3.

Some digital (ATSC format) stations may transmit 4:3 images in a way that will not allow expansion. You will be unable to adjust the picture format.

V. POSITION

This function allows you to select when aspect style is either Full or Fill or Smooth Wide. Vertical position can be changed with this mode. For example, it will be useful for centering the picture when there is gray area at both top and bottom of the picture with HDTV signal. Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).

COMPONENT COLOR TYPE

This function allows you to automatically change tint and color coordinates for DTV programs. HDTV - High Definition Television - Use for High Vision Signal Y-PBPRfrom HDTV Set-Top Box. SDTV /DVD - Standard Definition Television or DVD (Digital Versatile Disc Player) Y-CBCR.

VIDEO DISPLAY

The Video Display feature allows you to display 1080i or 540P signal modes. This feature selection is not available when 1080i signal is input.

NOTES: 1. The aspect Style setting you select for an ANT input will automatically be set for the other ANT input. However, all five video inputs have independent Aspect Style settings.

2.You will not be able to access the V. Position menu if Aspect Style-Normal is set.

3.You will only be able to access the Aspect Style menu when viewing a 4:3-480i or 480P. When viewing a 16:9-1080i or 720P input you will not be able to access this menu. FULL mode will be automatically selected

4.If COMPONENT COLOR TYPE is set improperly (does not match actual input signal), the color and tint of the main picture will be abnormal.

5.You must be tuned to VIDEO: 4 or 5 input and have a component hooked up to the Y-PBPRinput jacks to access this component color type.

6.All component color type settings will affect only color component input you are currently viewing. If you are using both sets of component input jacks, be sure to set the component color type feature for both inputs.

7.When 1080i signal is input, Video Display menu will not be accessible.

47