Hitachi 9900 Hitachi Data Systems, Availability, Byte, Back End, Business Interruption, Carb

Hitachi Data Systems

Availability

In computer science, availability refers to the degree to which a system or resource is capable of performing its normal function. Availability is measured in terms of Mean Time Between Failure (MTBF) divided by MTBF plus the Mean Time to Repair (MTTR). The availability equation is expressed as follows:

AVAILABILITY = MTBF / (MTBF+MTTR).

For example, a server that fails on average once every 5,000 hours and takes an average of two hours to diagnose, replace faulty components, and reboot, would have an availability rating of 5,000/(5,000 + 2) = 99.96%. This would correspond to a Level 3 rating using the Scale of 9s.

Byte

A unit of data that is eight binary digits long and represents one text character.

Back End

In reference to storage arrays, the back end includes the controllers, disk drives, and paths to the disk drives. On the Hitachi Freedom Storage™ Lightning 9900™ V Series these are the ACP pairs, the Fibre Channel loops, and the Fibre Channel disks.

Bit

Eight bits compose a byte. This term is spelled out in compound abbreviations (Mbit/sec and Gbit/sec) to avoid confusion with abbreviation for byte - B (as in MB or GB).

Business Interruption

Any event, whether anticipated (i.e., public service strike) or unanticipated (i.e., blackout) that disrupts the normal course of business operations at a corporate location.

CA

Cache Adapter. The CA resides on the cache boards and connects to the Cache Switch (CSW).

CARB

Cache memory arbitrator circuit. A Hitachi-designed logical circuit in the Cache Switch (CSW) used to arbitrate access to cache.

Cache

Cache (pronounced cash) can be either on-chip memory circuits in a microprocessor (e.g., L2 processor cache), a reser ved section of main memory (e.g., system or server cache), or an independent, high-speed disk storage device (e.g., a Web cache). Two types of caching are commonly used in personal computers: memory caching and disk caching. Disk caching can dramatically improve the performance of applications, because accessing a byte of data in RAM can be thousands of times faster than accessing a byte on a hard disk. When data is found in the cache, it is called a cache hit, and the effectiveness of a cache is judged by its hit rate.

56