16
[Screen Display]
(Figure 35)
[Summary]
Figure 35 will appear when power interruption occurs during Auto-Run or the
current process is cancelled/paused during Auto-Run.
Before re-starting the Auto-Run, the Operator needs to setup the START
PROCESS NO., END PROCESS NO. and PETTE POSITION NO. according to
the status at the interruption of Auto-Run so that the operation will be continued
without missing steps.
Start Process: Range 1-8 (a smaller number than End Process)
End Process: Range 1-8 (a greater number than Start Process)
Position: Pette start position, range 1-20
[Operation Key]
(Figure 35)
Start Process key: To Figure 2 numerical value input screen with the
title [Start Process]
End Process key: To Figure 2 numerical value input screen with the
title [End Process]
Start Position key: To Figure 2 numerical value input screen with the
title [Start Position]
Next: To Figure 8 Auto-Run screen
Back: To Figure 5 Main Menu screen
Start
Process
End
Process