Hitachi BE-IR30, BE-IR31 7. Optical dimensions

BE-IR30 / 31 9

Lens

19.2 ± 0.5

(C-mount)

1.4 ± 0.2

CCD

Base plate

Imaging face

Lens-mount

Extension of optical path due

to the thickness of CCD glass

is considered.

7. Optical dimensions

Contents

Main Table of Contents 1. Introduction 2. General 3. Composition 4. Specifications 4 Specifications 4 Specifications Auto electronic shutter 5. Notes to users 5. Notes to users Page Page 6. External view 7. Optical dimensions BE-IR30A/31A 8. Installation 9. Typical connection 9. Typical connection 10. External sync (BE-IR31) 11. Function setting and changes 11-1 AGC on / off Location of chip resistor (Main board side A) 11-2 Gamma response Location of chip capacitors (Main board side B) 11-3 Auto electronic shutter on / off Location of chip resistors (Main board side B) 11-4 Changes to fixed shutter mode The fixed shutter mode can be changed by replacing the chip parts indicated below. (Main board side A) (Main board side B) Location of chip resistors Page Page 11-7 HD and VD output (BE-IR30 only) Factory setting Location of chip resistors(Main board side B) Pin No. Signal