Hitachi C43-FL9000, C52-WD9000 ON-SCREEN Display Menu Function Menu, Auto P.Size option

ON-SCREEN DISPLAY MENU FUNCTION MENU

Function Menu

Function menu allows you to select scan mode, multi picture mode etc. Please follow the steps below.

1Press the MENU button to display the menu.

Press the Ÿź cursor buttons to select the Function option as shown on the right.

2 Press the ENTER button to enter the Function menu.

Press the Ÿź cursor buttons to select the Scan Mode option as shown on the right.

Note: The menu of the C43-FL9000 model as shown on the

right does not include the TV P.Size option and the

Auto P.Size option.

3LFWXUH

$XGLR

7LPHU

)XQFWLRQ Ź

6HWXS

6HOHFW6HW

	)XQFWLRQź				
	6FDQ0RGHŹ					3URJUHVVLYH
	7936L]H					([SDQGHG
	$XWR36L]H					2Q
	0XOWL3LFWXUH				
	5HVHW				
		6HOHFW	6HW		5HWXUQ
					
					
					

3Press the ENTER button to enter the Scan Mode menu

as shown on the right.

You can press the ŻŹ cursor buttons to select different scan modes to improve picture effect.

1 For PAL or SECAM system you can select scan mode from 100Hz,Virtual HD or Progressive.

2 For NTSC system, you can select scan mode from Virtual HD or Progressive.

3 When the input signal format is 480p signal, the scan

mode setting will be fixed at Progressive.
		Scan Mode	Ź	3URJUHVVLYH
4	When the input signal format is 576p signal, you can
		6HW	5HWXUQ
select scan mode from 100Hz or Progressive. The 100Hz
mode can eliminate flicker.
5	When the input signal format is 1080i/60 or 720p/60 HD signal, the scan mode setting will be fixed at HD.

6When the input signal format is 1080i/50 HD signal, you can select scan mode between 100Hz or HD. The 100Hz mode can eliminate flicker.

21